Omarīs Nature Photography
NIKON F100 CUSTOM SETTINGS
I use the following Costum Settings on my Nikon F100
* 1: Auto film rewind at end of film roll
1- 1: Activated, with automatic start of rewind at the end of of the roll
*2: Ev steps for exposure control
2- 3: 1/3 EV step increments
*3: Bracketing order
3- 0: Deafault, I dont use this feature
*4: Autofocus activated when shutter release button is lightly pressed
4- 0: AF is activated (default)
*5: Warning of non-DX-coded film, when ISO is set to DX
5- 0: After film is advanced to the first frame (default)
*6: Focus area selection
6- 0: A focus detection sensor is selected when the appropriate part of the thumb pad is pressed
*7: AE lock when shutter release button is lightly pressed
7- 0: Disabled (default)
*8: Auto film loading when camera back is closed
8- 1: Enabled
*9: Dynamic AF mode in AF-S with Closest-subject priority
9- 1: Disables closest-subject priority
*10: Dynamic AF mode with Closest-subject Priority in AF-C
10- 0: Disables closest-subject priority
*11: Autoexposure/flash exposure bracketing
11- AS: Default
*12: Command dial functions
12- 0: Default
*13: Use either dial for exposure compensation settings
13- 0: Disabled (Default)
*14: Multiple exposure, film advance
14- 0: Default
*15: Time delay for auto meter switch-off (exposure metering)
15- 4: Shuts down after 4 seconds
*16: Self-timer duration
16- 2: Shutter is released two seconds after shutter release button is pressed
*17: LCD illumination control with any button
17- 0: Disabled (default)
*18: Data imprint on frame
18- 0: Canceled (default)
*19: Aperture setting with certain lenses
19- 0: Default
*20: Shutter release indication via LED
20- 0: Disabled (default)
*21: AE-L/AF-L button options
21- 0: Default
*22: Aperture selection via lensīaperture ring
22- 0: Must select f/stops via sub-command dial (default)